Touch-up paint for steel roofing 200 ml
Product description
The product is intended for repairing and retouching damage, on a larger surface, thanks to the wider brush diameter, it is possible to cover deeper scratches.
Available colours:
Technical specifications
| Capacity | 200 ml |
| Application method | Brush |
| Brush coverage width | 15 mm |
| Application temperature | 10-25 °C |
| Drying time | 10-30 minutes depending on conditions |
| Fully hardened | 24 hours |
| A package includes | 12 items |
| Colours | full RAL palette |
| Coverage | 1 m² |
Instructions
Directions for use: Before commencing repair work, clean the painted surface. Stir the paint by shaking the can for about 3 min. The product is recommended to be used at temperatures above 10 °C to 25 °C. The second layer can be applied after 20 minutes.
Precautions: During the work, it is recommended to use basic precautions, such as rubber gloves and protective glasses. You should also protect your face and respiratory tract - using a protective mask. Vapours may cause drowsiness and dizziness. Rooms that were closed after applying the paint should be aired until the smell of the paint disappears. Protect the container against sunlight and heating above 50 °C. Do not pierce or burn, also after use. Protect against ignition sources - do not smoke during application. Keep out of the reach of children. In case of contact with eyes or skin, rinse immediately with plenty of water and seek medical attention.
Storage: Storage temperature between 10 °C - 35 °C in closed packaging. Protect against frost and sunlight.